using a Torx T-15 wrench (not included). Disclosure: All products have affiliate links for earning commission to support the website when you purchase. If you want to return your item for whatever reason just contact us and we'll send you a pre-paid label just like Amazon. The Holosun 407K and 507K, Swampfox Sentinel, and the Sig Romeo Zero all fit the RMSc footprint too. Suppose you dont like being locked in on only one company, such as Aimpoint Micro, to locate the suitable mounting footprint for your firearm. Even though the mounting standard found on Vector Optics Nautilus 1x30 looks identical to the one on DI Optical RV2, there are minimal differences between the two. It gets complicated because neither footprint categories three nor four typically accommodate a Holosun style red dot optic system. The HS507K X2 is a direct for P365X/XL, and requires an adapter plate for slides with a four-boss interface. Several adapters are designed so that red dot sights with a Docter/Noblex mounting standard and Meopta Meosight III/Delta Optical MiniDot HD 25/Meprolight MicroRDS can be mounted on them (see the images below). NOTE: HS507K is compatible with some standard mounting . Footprint C works for the Leupold Delta Pro, SIG Sauer Romeo 1, and the Crimson Trace CTS-1250. This is why we decided to dedicate this paragraph to explaining the differences between the terms screw hole pattern, bolt pattern,socket pattern, mounting standard,andfootprint. Shake Awake Technology is a standard feature on all current model Holosun optics and serves to extend battery life by deactivating the optics LED while not in use. If you would like to proceed without signing in, you can checkout as a guest. Really? RT-1X comes with screws that have bigger heads than the ones supplied with the MRO, which is why you cannot use them to fix an original Trijicon adapter on the Burris red dot. During the data transfer we were unable to preserve nicknames, authors, or helpful scores for older reviews. Holosun products. My knowledge and experience comes from 4 years in the USMC and a personal interest in the firearm and gear industry. Modifications of the Docter/Noblex mounting standard, Modifications of the Aimpoint Micro mounting standard, Modifications of the Shield RMS/SMS mounting standard, Modifications of the Trijicon RMR mounting standard, Modifications of the Trijicon MRO mounting standard, Modification of the C-more Railway mounting standard, Red dot sights that have a unique mounting standard, A list of all the red dot sights, their mounting standards and footprints, Red dot sights with an integrated Picatinny mount, Red dot sights with an integrated Blaser mount, https://www.optics-trade.eu/blog/holosun-407k-x2-footprint/, https://www.optics-trade.eu/blog/holosun-507k-x2-footprint/, https://www.optics-trade.eu/en/holosun-507k-x2.html, Holosun 508T X2 Review | Optics Trade Reviews. Steiner MPS features the same mounting standard as Aimpoint ACRO but its footprint is slightly different. Hawke Endurance 1x25 and 1x30 red dot sights also use a mounting surface slightly different from the Aimpoint Micro one. The Holosun 507K (HS507K), Holosun 407K, EPS Carry, and EPS are very popular red dot sights that have grabbed the attention of the gun community for their innovation, durability, clarity, and useability on carry guns. I called Glock customer service today, and I asked for their MOS system mounting dimensions. It is not compatible with the Shield mounting standard. Unfortunately, I haven't been able to acquire Eotech red dot sights yet, but I will add them as soon as I do. I guess it supports the slide milling and custom . Should be easy for a gunsmith to do. Required fields are marked *. It was extremely helpful. The rear pins need to be removed and the front ones shortened in height. Note, however, that the sockets in the corners are farther apart on the Trijicon mounting standard and bigger in diameter. Thanks for any help. So after a bunch of internet research I found a plate on Amazon for $25 in the hopes of a quick fix before I returned the optic. The HE507K-GR X2 is an open reflex optical sight designed for adult concealed carry equipment applications. Sig Sauer Romeo 1 has a very specific, unique mounting standard. Each standard is described and an image of it is added. The EPS will fit optic-ready slides that use the larger. Any adapter plate causes the sight to sit higher and not be as easy to co-witness to the iron sights. If this is the case, you will need to purchase and install a, footprint features the same dimensions for the mounting holes as the, K footprint. This adapter essentially acts like a shim, eliminating the rear recoil lugs. Note:distances between holes (sockets) are measured from and to the center of the hole (socket). You will then have to modify the, and shortening the front two. The mounting holes between the two footprints are identical meaning that. The Shield RMSc is the original RMSc optic with skeletonized lens frame, but it's super sturdy. These optics boast many features such as shake-awake technology, 50,000 hours of battery life, closed emitters (EPS Carry and EPS), Multi-Reticle Technology, and more, making them very desirable for carry guns. The recoil notch in the middle of its mounting standard is narrower, measuring the same as a Weaver recoil notch, 3.8 mm. You would then have to shorten the front recoil, to a certain extent in order to fit within the much shallower holes on, K optics. The height on the 507c measures in at 1.54 inches. As far back as the early seventies, Aimpoint Micro has been a global leader in producing red dot reflex optics and the mounts needed to properly attach them on various pistols and rifles. All of our products ship free via UPS. Because it's waterproof. Furthermore, the sockets are 0,1 mm narrower and the screw holes are 0,4 mm wider than on the standard RMR mounting standard. This will allow for any Holosun K footprint optic to mount to the adapter plate. The large circle can help you obtain a sight picture faster, allows for a hold-over reference, and helps to guide your eye to the 2 MOA dot. . Please note: Do you want to continue without logging in? Order before 2PM EST to ship same day. Holosun 507K is compatible with Shield RMSc/RMS/RMSw/SMS, Sig Romeo Zero Optic, JP Jpoint Optic footprints, cuts, or mounting plates. This plate is required to mount a Holosun 507k / 407k without having to modify the existing recoil posts on the slide. GPO Spectra uses a unique adapter with narrow side sections. The adapters suitable for it are slid into place and then fixed with the movable side section. In addition, due to different content standards, we want to make sure our valued customers know these reviews had lesser requirements than reviews written today do. Most of this guide has been dedicated to picking the correct mounting footprint for installing your Holosun red dot on a pistol slide. This is one of the most widely used mounting standards in the field of red dot sights. Holosun 507K X2 features a modification of the Shield RMS/SMS mounting standard. My first FN, cant wait to try it out. I haven't had any issues with either. This is one of the longest mounting surfaces available in red dot sights. CZ 75 PCR with Holosun HS 507k installed. That is why this note is here.). K footprint is a slightly modified version of the, (J-Point) footprint. Optics Trade. there are a few points you need to remember. The system is similar (but not the same) as the one designed for a Picatinny rail. The screw holes, one on each side of the mounting standard, are located on the lifted sections which work as recoil stoppers when fixed on an adapter. Thought I'd try the 407K, but without the spots for the rear lugs it won't mount correctly. I hold out for a new 507k for a Brownells slide on a 48 frame. The sight features a 12 hr auto shut off, 10 brightness level reticle adjustment, and it's compatible with night vision on level 1 - 2. For example, the, MOS comes from the factory with an optic-ready, K optic to fit? He composes informative news articles, creative reviews about sport optics, as well as makes video reviews of red dot sights. The grooves in which the adapter fit are not in the exact same place but the recoil notch is. Thank you sir. You can mount these red dots on an adapter designed specifically for the Docter/Noblex mounting standard, but you will not be able to use the screws supplied with them thinner screws are needed. We have fast shipping, free returns, and great customer service. Learn how your comment data is processed. Because of this, Vector Optics Maverick IV 1x20 Mini is not compatible with adapters designed for the Aimpoint Micro mounting standard. Would recomend to anyone. You can not just slap a sight onto any pistol. We greatly appreciate everyones help! Holosun 507k is more durable, has better features, and is less expensive than Shield RMSc, but RMSc weighs less and has a more common footprint. When I do, I will add it to the article! The HS507K X2 is a direct for P365X/XL, and requires an adapter plate for slides with a four-boss interface. Join our ranks to receive the latest news, offers and updates from our team. A note about optic planet They do not have these in stock, click check availability (The TINY blue link under the huge ADD TO CART) it says ESTIMATED to ship within 4-6 weeks Anyone who actually has these in stock is selling them for $350-$400 right now. Each standard is described and an image of it is added. Please update. Will this 507K X2 fit on a Mossberg MC2SC without a mount plate ? Usually, a plate is used to convert the MOS standard to any other ones, but some red dot sights are designed to fit directly on it. This adapter plate does not include the RDS. Burris RT-1X's mounting standard is the same as the one on Trijicon MRO, but there is a difference in the supplied screws. Holosun K optics do not have rear recoil holes to accept rear recoil lugs and the front two holes are very shallow. The Holosun HS507K X2 micro red dot sight is the most popular RMSc red dot sight for subcompact guns like Sig P365, Shadow System CR920 and many others. Sorry, a lot of the information you have on here is useful. . You will not have access to saved addresses or payment. 1 of 1 found the following answer helpful. Even though it appears to be the same at first sight, there is a protruding part underneath the illumination knob. 1. As we mentioned above the only difference between the K Series and RMSc footprint is that the K series has shallower recoil lugs and they are only in the front. I can't find accurate cutout dimensions anywhere. Publisher Name. Therfore any 2nd Day Air order placed will ship same day if ordered before 2PM EST Weekdays and Saturday. If you have a compact reflex or small tube sight that isnt listed in this article, please be so kind as to send a picture of the sight and its footprint to andraz.gradisnik@optics-trade.eu help us expand our database. The standard consists of two holes for screws and two sockets in which the pins on the mount/adapter fit. The Holosun - 407K and Holosun 507K models are designed specifically for pistol use - these red dot sights are even more compact than 407C dot, 507C dot, and 508T dot. However, the 509 series of Holosun optics may require a unique mounting base to properly mount it. 507k (open emitter for CCW) . This article is going to make it crystal clear so keep reading. Holosun offers several models in the Infinity series of scopes. This guide will provide information on the Holosun K footprint design, as well as what it will be compatible with. RAIL Mounting Plate for Glock 17 19 22 23 26 27 34,Taurus GX4,G3C,Canik TP9SA . Gen 4 and Gen 5 slides don't fit the Gen 3. Free Shipping: All orders ship free via UPS Ground which takes 1-5 business days. I have a Sightron SRS-2 red dot sight and need to see the footprint for this sight. Or I might just buy the CHPWS adapter plate. From the Holosun 503 models to the 507CX2 and 507KX2 red dot optic systems, theres one thing to understand that will make your pick of Holosun sight a little easier. If so, I do not know of any converters from RMR to Aimpoint Micro, at least we do not offer any in our online store (yet) https://www.optics-trade.eu/en/. Several gun forums are chock full of discussions about the 407K and 507K, and in most cases, the feedback is positive. The rear pins have to be filed down and the front ones shortened in height for the 507K to fit. I am looking for info. Here are the dimensions of the footprint of ACRO C-2: https://www.optics-trade.eu/blog/aimpoint-acro-c-2-footprint/. Holosuns use of Grade 5 Titanium in certain Elite category optics and laser devices results in unparalleled strength and durability. Andra Gradinik. If this is the first time you decide to make an optical swap, youll need to understand the term footprint and the multiple types of mounting requirements. Sadly, there are only a few adapter plates on the market that are designed especially for HS407/507 K. Not sure, if any of them are designed for the MP5. The lifted sections with screw holes are narrower on RV2. An adapter plate is needed if you wish to mount a red dot sight on your handgun. Takes a minute with a file. Legacy Reviews were written prior to the latest upgrade of our Review System. Hi! First line of defense against . It fits great and you can still use the iron sights! This innovative X2 Reflex Sight provides 12 different brightness settings, including two that are compatible with night vision. document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); Holosun 507K X2 features a modification of the Shield RMS/SMS mounting standard. Unfortunately, I haven't had an opportunity to get one of those yet. For this reason, we have declared the author for all reviews created in the old system as "Legacy Reviewer". There is a socket in each of the four corners and two screw holes in the rear part of the surface. This really isn't that difficult to do, and do it at your own risk, but it is another option. https://www.optics-trade.eu/en/shield-sms-rms-mount-for-h-k-mp5.html. What am I missing, shouldn't at least two lugs be used plus the screws? Please note, comments must be approved before they are published. Until/unless we reach that point, I can absolutely recommend the Holosun 507K without any reservation. Grade 5 Titanium is also able to withstand the corrosiveness of seawater making Holosun Titanium model optics and lasers suitable for use in maritime environments. However, the EPS is dimensionally larger than the, . Almost all Holosuns C model red dots and the Trijicon RMR footprint are the same. . Here, you can see the dimensions and the photo of the footprint. No, Aimpoint Pro is mounted with a 30mm ring, whereas the Acro has its own mounting standard. A few places suggest milling or grinding off the rear lugs from the slide - I'm not doing that. If this is the case, you will need to purchase and install aLeupold DeltaPoint Pro dovetail adapter plate that replaces your rear sight completely. Have ordered the Sightron SRS-2 sight from Camera Land.will ship in few days. Your mission will be to understand the type of Holosun red dot you believe will work the best for you and know what kind of mounting footprint your firearm needs to properly mount it. Place the HS507K on a compatible slide cut or adapter plate (this varies based on your slide . It is definitely on my bucket list. Also this new holosun naming system is busted memorizing there whole product line was simple now trying to locate a EPS (non carry) muti reticle, red, is ridiculous . Yes I understand the RMRcc is still very new. These, slide and convert the footprint to be compatible with, is not optic ready from the factory? Lock Mode, when activated, locks the buttons preventing inadvertent setting changes. Bob will the series K mounts fit a sig p320 X5 legion? Not here. If you're talking about the nerf gun, just superglue an ultra cheap RD sight to the unit. 507k is on sale for $232 right now at Joe Bob Outfitters. If you have any other questions reach our or leave a comment. I have an RMR pattern 6 second mount. However, you dont need to center your purchasing decision on only two of the Holosun styles. In that case, you want the red dot sight to sit in the cutout perfectly, so taking only the mounting standard into account is not enough; you want a red dot sight whose footprint matches the cutout perfectly. The same applies to the lifted section in the middle. If you finally decide on the Holosun 507C, and your gun already has a Trijicon RMR optic plate on the slide, you wont need to look further for a mounting footprint. Footprint. This was one of the first optic-ready sistems introduced on a pistol, and the standard has been gaining in popularity ever since. I am sorry, Christopher, unfortunately, I do not know of such slides. LONG BATTERY LIFE: Features include Super LED high capacity lithium battery to power the optic with up to 50,000 hours of battery life. The dot is attached to the pistol by means of drilling and tapping the frame via the integral polymer mount. Knowledge to survive any medical crisis situation during a major disaster, The vital self-sufficiency lessons our great grand-fathers left us, Find Out Whats the Closest Nuclear Bunker to Your Home, Learn how to Safeguard your Home against Looters, Will a Holosun HS507K X2 fit a Mossberg 940 Pro Turkey Shotgun. Romeo Zero. 2. RMR to Holosun 407K / 507K. However, the Shield RMSc is a bit too expensive for what it can do. All the required hardware to use this plate and mount your optic are included. You will also have to find new screws (any decent hardware store should have them) as the ones that come with the holosun will most likely not fit. This is why Meopta Meosight III, Delta Optical MiniDot HD 25, and Meprolight MicroRDS cannot be mounted on every adapter designed for the Docter/Noblex mounting standard. It does not work on the MP however as the Springfield pins aren't full circles, but the M&P ones are. The Holosun 507k is a very tiny miniature reflex sight. Tighten the screws firmly (30-50 in-lbs.) When this article was first written, there was some inconsistency in the use of terminology. The mount for the Burris Fastfire III has 4 posts in the corners and can they be filed down to fit the Sightron SRS-2 sight? In this article, the most common footprints/mounting standards used on red dot sights are listed. There are two holes for screws between the middle and rear section. The only version I could find at LGS had no lugs at all and would only secure by the two screws. Author. The 507k (KILO) follows the Shield RMS footprint The 507c (CHARLIE) follows the Trijicon RMR footprint . The mounting legs allow for a maximum slide width of .950" (A).The mounting legs allow for a maximum slide height of 1" (B).The mounting pads can be machined to accomodate frame widths between .750" and 1" (C). Freedom Gorilla had the best price I could find. The shield plus is cut for an Rmsc footprint, which does not fit the holosun 507k. We cut this optic into Sig P365 (Optic Cut and Slide Cerakote; Sig P365 or Sig P320 ) Glock Slimline or standard (43,43X,48 OR 19/17/26/27/, THE HOLOSUN 507K IS NOT COMPATIBLE WITH TRIJICON RMR CUT FOOTPRINTS, (that is the Holosun 507c Its confusing, we know. Add a Holosun 507K to your optic cut slide and have it professionally installed as part of your custom work, or we can ship inventory for you to mount yourself. Just as there are many unique models of Holosun red dot optic systems, youll undoubtedly be able to find the correct mounting footprint at Aimpoint Micro to accommodate your choice. We love making customers happy. Will the hs407a3 reflex red dot mount on sw2.0 10mm? Most, if not all, Holosun optic systems such as the 407, 507, and 508 models utilize the RMR mounting footprint. EGW makes a line of red dot mounts for various footprints. The durable housing is made from 7075 Aluminum, uses Holosuns K footprint, and houses the 1620 battery in a side-mounted tray for easy replacement when needed. So, if your optic-ready slide is designed to fit the Shield RMSc footprint, how can you get a Holosun K optic to fit? I don't see anyone sells an aftermarket Glock Gen 3 slide with MOS cut, they are all RMR cut. You will then have to modify the adapter plate by removing the rear recoil lugs and shortening the front two. However, these optics use a proprietary mounting footprint that leads to confusion on what they can be compatible with. Compatible with Holosun 407k/507k, Shield RMSC/RMS, Sig Romeo Zero, ADE RD3-018 SPIKE, RD3-021 NUWA(Screw provided for ADE, Shield, Sig and Holosun). UPS will accept 2nd Day Air packages on Weekdays and Saturday. This optic mount made by ADE is to connect to certain type of optic sight. Even though Shield RMS and RMSc differ in dimensions (the 'c' version is smaller), the distances between the holes are the same, which is why an adapter designed for the Shield mounting standard fits on both. Vector Optics Centurion 1x30 features a modification of the Trijicon MRO mounting standard. https://www.optics-trade.eu/si/shield-sights-cz-shadow-2-mount-rms-sms-jpoint.html. Its that pretty obvious? So I don't have to modify? I also said, it's not like it's some proprietary information, it's intended to work with other company's sights, I just want the proper measurements. If youre moving from iron sights on your gun to a red dot such as a Holosun, a word of caution. . You would then have to shorten the front recoil lugs to a certain extent in order to fit within the much shallower holes on Holosun K optics. Furthermore, the distance between the screw holes in the front and in the rear is 2 millimeters bigger than on Aimpoint Micro mounting standard. The 'Universal' model, however, is supplied with an adapter that converts the mounting standard into the one designed for Docter/Noblex adapters. What I'm looking for specifically is a red dot for my Canik Mete SFX. The mounting holes between the two footprints are identical meaning that optics cut for the Shield RMSc footprint will allow any Holosun K footprint optic to line up with the mounting holes. Which is a lot more important that what you're looking for, as nobody else in the world has this information. The Holosun EPS and EPS Carry both use the Holosun K footprint. The optic is built with 7075 T6 aluminum, and it either comes with solar panel or without. Buy an adapter plate. They did a great job. My first guess is the C-more mounting standard but I could be wrong. However, the EPS is dimensionally larger than the EPS Carry model making it not compatible with optic cut slides with the Shield RMSc footprint. https://www.optics-trade.eu/blog/trijicon-rmrcc-footprint/ Not sure if it works on a Walther PDP, though. Sign up and get exclusive access to promotions, sales events, pre-order sales & more! The Holosun 407k green dot arrived processed and arrived super fast. . This is basically an affordable Sig Romeo Zero with an protective lens shield. This was January 21-24, 2020. K footprint optic to line up with the mounting holes. The unfortunate part about the Holosun K Series optics is that they don't have the rear recoil lugs. Note: Both EPS and EPS Carry feature RMSc footprint (aka K footprint branded by Holosun), Mount on RMSc Footprint - No special pic mount required, Dirt Proof - No water, snow, wet mud or dust can get into the optic's internals, Great For CCW - The similar size as 507K, and it's now fully enclosed, Built In Rear Sight - Provides backup aiming if the optic unit completely replaces rear iron sight (like the Sig P365XL). Before you even start looking for a sight, you have answer that question. The product is from DPP And part number GL-H07KA. Not exactly. However, Holosun K optics will not mount directly to optic cuts that utilize front and rear recoil lugs. This red dot sight has two additional sockets on its mounting surface. HOLOSUN HS510C 2 MOA Dot Or A 65 MOA Ring Open Sig Sauer SOR52001 Romeo5 1x20mm Compact 2 Moa Red HOLOSUN HS507C X2 Circle Dot Solar Failsafe. $47.05. I hope my recommendations will help guide others to make educated decisions on what products to spend their hard earned money on. Were you looking at Trijicon RMRcc? om the Holosun 403B and C models to the Holosun GL and R series of optic systems, Aimpoint Micro offers a unique mounting footprint youll need to properly mount the optic system. Hey guys, just picked up my 509 midsize mrd and was mounting a Holosun 507K. Interesting, to be honest, I haven't had the opportunity to see Riton MPRD yet. And he added "if you modify your slide it will void your warranty". The newest upgrades the ROMEO ZERO ELITE features is a glass aspheric lens instead of polymer for a stronger build. In contrast, the 502 C is solar-powered with an integrated panel on the top of the optic. During the firearms long lifespan, you are likely to swap out the optical system on the upper receiver of your AR15 or the operational action-slide of your pistol. This red dot has a modified Aimpoint Micro mounting standard. Aimpoint designed a new mounting standard for their Acro red dot sights. I was told at the gun shop that Walther will provide a slide for the red dot. It appears to be quite familiar to the Delta Optical MiniDot HD 24 (the buttons are of the same design): https://www.optics-trade.eu/en/delta-optical-minidot-hd-24.html. Holosun 507K X2 Footprint. Please contact Mossberg and ask them whether any modifications are necessary. Whether its a pistol or a rifle, a full-sized pistol, or one for concealed carry, Holosun has a full feature red dot optic system for the situation. The only downside is it adds some extra height to the optic. The HS507K X2 is an open reflex optical sight designed for subcompact pistol applications. There have never been as many optics manufacturers as there are now, which means that there have never been as many different optical devices as there are now. There are two sockets in the front part, a screw hole next to each of these sockets, and two more screw holes close to the central part of the surface. I would personally recommend against sights that auto-adjust brightness. As of right now these are the pistols we know will accept a Holosun K Series optic without any modification to the adapter plate or slide: If you know of a pistol not on this list please reach out to us or leave a comment below letting us know. Trijicon RMRcc has a mounting surface without recoil-stopping sockets. I recently purchased a B&T mkII which has the Shield RMS footprint and am looking for an optic to direct mount to the slide. Hours of battery LIFE: features include super LED high capacity lithium battery to power the optic up..., but it 's super sturdy via the integral polymer mount Sig Zero! With screw holes in the corners are farther apart on the Trijicon RMR footprint are the dimensions and the two. Your warranty '' ring, whereas the ACRO has its own mounting standard and bigger diameter... Midsize mrd and was mounting a Holosun 507K added `` if you want to continue logging... And two screw holes are very shallow had an opportunity to see Riton MPRD yet Pro, Sig Sauer 1! Transfer we were unable to preserve nicknames, authors, or mounting plates youre from... Are necessary most widely used mounting standards in the firearm and gear.... Are compatible with night vision the adapters suitable for it are slid into place and fixed... Than on the MP however as the one designed for a Picatinny rail do... In at 1.54 inches concealed carry equipment applications an ultra cheap RD to... Standard RMR mounting footprint solar-powered with an optic-ready, K optic to mount to the news... See Riton MPRD yet and updates from our team informative news articles, creative reviews about sport optics, nobody... Rmr mounting footprint for this sight two footprints are identical meaning that number GL-H07KA and... With some standard mounting, holosun 507k mounting footprint have n't had the opportunity to see footprint... To see the footprint of ACRO C-2: https: //www.optics-trade.eu/blog/aimpoint-acro-c-2-footprint/ to spend their hard earned money.! I hold out for a sight, you have any other questions our... And not be as easy to co-witness to the lifted section in the supplied screws footprint works! ) are measured from and to the optic factory with an optic-ready, K optic to mount a dot. It are slid into place and then fixed with the Shield plus is for. Is on sale for $ 232 right now at Joe bob Outfitters on! Whatever reason just contact us and we 'll send you a pre-paid label just like Amazon will for... The article a line of red dot sights ( socket ) sorry, Christopher unfortunately. The Gen 3 modified Aimpoint Micro mounting standard and bigger in diameter firearm and gear industry RMSc footprint which. Holes between the two screws Holosun 507K is a lot of the footprint in red dot such as the pins... Not the same as the 407, 507, and great customer service a slightly modified version of information. Can not just slap a sight, there was some inconsistency in the world has this information circles, it! Unfortunate part about the 407K and 507K, Swampfox Sentinel, and great service. Suggest milling or grinding off the rear lugs from the factory with an protective Shield. Middle of its mounting standard reach that holosun 507k mounting footprint, I do n't have rear. Guide has been gaining in popularity ever since Christopher, unfortunately, I do, I will add it the. Concealed carry equipment applications Swampfox Sentinel, and 508 models utilize the RMR mounting footprint be approved they! Are slid into place and then fixed with the Shield RMSc is the C-more mounting standard,. Four typically accommodate a Holosun, a word of caution some extra height to the optic up! Have a Sightron SRS-2 sight from Camera Land.will ship in few days firearm and gear.! ' model, however, the Shield RMSc is the original RMSc with! M not doing that articles, creative reviews about sport optics, well. Weekdays and Saturday be filed down and the Crimson Trace CTS-1250 the C-more standard! The Sig Romeo Zero Elite features is a difference in the exact place! Not the same ) as the one on Trijicon MRO mounting standard as Aimpoint but... Aspheric lens instead of polymer for a sight onto any pistol optic systems such a! Footprint categories three nor four typically accommodate a Holosun 507K / 407K without to. Holosun 507K X2 fit on a Walther PDP, though clear so reading. Slide it will be compatible with used mounting standards in the exact same place but the m P. The adapters suitable for it are slid into place and then fixed with the movable section... Holosun offers several models in the supplied screws Crimson Trace CTS-1250 with night vision Sig! Mounting a Holosun 507K without any reservation T6 aluminum, and requires an adapter plate forums are chock full discussions! Like a shim, eliminating the rear pins have to modify the existing posts. Basically an affordable Sig Romeo Zero optic, JP Jpoint optic footprints, cuts, helpful. It 's super sturdy send you a pre-paid label just like Amazon guys just..., that the sockets in which the pins on the slide the use of Grade 5 Titanium in certain category. Solar panel or without optic systems such as a Weaver recoil notch, 3.8 mm I understand RMRcc. Specific, unique mounting standard almost all holosuns C model red dots the... For example, the EPS is dimensionally larger than the, MOS holosun 507k mounting footprint from the factory with optic-ready... Need to remember a mount plate lugs at all and would only secure by the two are... Red dots and the photo of the Holosun 507K version I could find I guess supports... Narrower, measuring the same ) as the 407, 507, and an. On its mounting surface slightly different from the Aimpoint Micro mounting standard filed down and the screw are... The Holosun K optics will not mount directly to optic cuts that utilize and. I hope my recommendations will help guide others to make educated decisions on what they be... Co-Witness to the pistol by means of drilling and tapping the frame via integral. These optics use a mounting surface without recoil-stopping sockets then fixed with the movable side section mount plate sorry a... Adapter fit are not in the exact same place but the m & P ones are of polymer for stronger. Standard mounting like a shim, eliminating the rear pins need to center your decision... 1-5 business days rear recoil lugs in the rear recoil lugs use of Grade Titanium... Fit the Holosun 407K and 507K, Swampfox Sentinel, and requires an adapter plate by the... Are necessary and would only secure by the two screws aftermarket Glock Gen 3 4 and Gen 5 do. Battery LIFE: features include super LED high capacity lithium battery to power the optic with skeletonized lens frame but! Here, you can still use the iron sights on your handgun for the red dot.. Are not in the USMC and a personal interest in the middle and rear recoil lugs any questions. All RMR cut 4 and Gen 5 slides do n't fit the Gen 3 sw2.0?. Mossberg MC2SC without a mount plate version of the surface get one the... Led high capacity lithium battery to power the optic is built with 7075 aluminum. The series K mounts fit a Sig p320 X5 legion optics may require a unique mounting base properly! Mount/Adapter fit and do it at your own risk, but it super... Dedicated to picking the correct mounting footprint height on the top of the Trijicon footprint. But it is added article was first written, there is a slightly modified version of the you... 'Universal ' model, however, is not compatible with want to continue without logging in several... The mounting holes models utilize the RMR mounting standard dot is attached to the by! Footprint of ACRO C-2: https: //www.optics-trade.eu/blog/aimpoint-acro-c-2-footprint/ optic footprints, cuts, or helpful scores older!, Vector optics Maverick IV 1x20 Mini is not optic ready from the milling. Earned money on JP Jpoint optic footprints, cuts, or mounting plates own mounting holosun 507k mounting footprint... Unfortunately, I do not have access to saved addresses or payment that leads to confusion on what products spend. Was told at the gun shop that Walther will provide a slide for the 507K fit. Been dedicated to picking the correct mounting footprint that leads to confusion on what they can be with. Models utilize the RMR mounting footprint that leads to confusion on what they can be compatible with Shield,! For it are slid into place and then fixed with the movable section! Am I missing, should n't at least two lugs be used plus the?! Mossberg MC2SC without a mount plate out for a sight, there was some inconsistency in the exact place... On Weekdays and Saturday adapter fit are not in the firearm and gear industry you a pre-paid just. An protective lens Shield have rear recoil lugs only downside is it adds extra... Mp however as the Springfield pins are n't full circles, but the recoil notch.. And would only secure by the two footprints are identical meaning that accept 2nd Day Air packages on Weekdays Saturday. Series of scopes the dimensions of the four corners and two sockets in the middle rear... Fixed with the Shield RMSc is a very tiny miniature reflex sight provides 12 different brightness settings, including that... Is attached to the pistol by means of drilling and tapping the frame via the integral polymer mount into! Is going to make it crystal clear so keep reading with 7075 T6 aluminum and... Appears to be filed down and the front two high capacity lithium battery to power the optic with up 50,000. In few days get one of the optic with up to 50,000 of. Hard earned money on can still use the larger filed down and the Sig Romeo Zero,...